Home
Login
Signup
|
|
Rotating display stand, turn tables, for the display of graphics, or objects, even a pop up display column.... at your trade show display, shop or exhibition. This is made possible by the use of the correct turntable unit. Our turn tables come in a range of sizes and power to weight ratio's, all units will rotate clockwise unless other wise stated. These units come with set revolution speeds. We can even supply power to your displayed item via special slip rings, Supply of these units will take approx 1 week. Stocks of popular units are held, call for quicker supply. Custom speed settings are possible with our speed regulator, call for info, 01256 768178. All display drives are fitted with safety clutches. Please ensure all loads are centrally placed for a spread load. With the fitting of larger decks to suitable units we suggest the use of dolly wheels near the outer edge, these should not touch the ground but be a few mm off of it, please feel free to call for advice.
"PLEASE BE AWARE THAT YOUR CREDIT CARD MUST BE REGISTERED TO YOUR DELIVERY ADDRESS, IF NOT PLEASE CALL THROUGH YOUR ORDER, THANK YOU"
for other information on rotating display units click here
for other information motor drive display units click here
| Products: |
Rotating display stand TTC250 with 1000mm high graphic
Rotating display stand, 360 degrees of visual impact. A powerful turn table can give your displays a new dimension. This unit has dimensions 300mm dia foot plate with a 230mm dia display top, height is 100mm. The weight is 3.6 kilos, revolving speed of 2.5rpm. This small unit can carry a load of 25 kilos, and comes with slip rings to enable power transfer to your product if required. This unit has a graphic fitted of 400mm diameter and 1000mm high, please call for further details.
£
445.00
[+ Add to Cart] |
|
|
Adjustable rotating display plinth 450 - 1500 dia
An adjustable rotating display plinth or podium. The dimensions will range from 450mm diameter to 1500mm diameter, max display height of 1500mm. The unit will carry a load of 230 kilos at 1rpm rotation speed. Total weight is 14 kilos, power consumption is 10 watts, with 5 amp slip rings fitted for power supply to a secondary product. Height to the base top is 170 mm. Suitable for all manor of applications........revolving lightboxes to mannequins. Call for further info and supply times.
£
750.00
[+ Add to Cart] |
|
|
600 dia turntable TTCSW1000 - beech top - ally wrap
Turntable display stand..... a 600 dia beech top with cable management port for slip ring power supply to your product when required. The skirt on this unit comes in aluminium but other finishes are avialable, call for details. This can be custom built to your requirements just advise of your needs... 01256 768178. The Unit has a 4 Amp supply, rotates at 2.5rpm and will take a load of up to 100 Kilos.
This unit can also come with out the slip ring power supply, call for details....
£
640.00
[+ Add to Cart] |
|
|
TTCSW1000 beech top 450 dia rotating display table - ally skirt
Turntable display stand..... a 450 dia beech top to show off your product when required. The skirt on this unit comes in aluminium but other finishes are avialable, call for details. This can be custom built to your requirements just advise of your needs. This rotates at 2.5rpm and will take a load of up to 100 Kilos.
This unit can also come with slip ring power supply, add £20 call for details....
£
570.00
[+ Add to Cart] |
|
|
Battery powered turntable CBO40
Battery Powered turntable for 1 or Two "D-Cells" Capable of turning up to 3 Kilos with a maximum display of 12" cube Rotates 1.7 RPM Clockwise.
Unit dimensions 150mm Dia x 60mm High with an egg shell white plastic casing.
CALL FOR FURTHER DETAILS 01256 768178
£
38.00
[+ Add to Cart] |
|
|
Turntable display unit CSWD100
Mains powered unit for rotaing items for display purposes, bare bones unit, NO DECK. This unit will rotate 10 Kilos, rotating at 2.5 times per minute clockwise 124mm Dia turning Plate with 130mm base, 75mm height. NEED A CEILING HUNG UNIT ? ASK ABOUT THIS.........
£
105.00
[+ Add to Cart] |
|
|
Turntable base unit with power rings CSWD100
A bare bones display turntable, mains powered unit with power rings (power supply to display item above)
This unit will rotate 10 Kilos, rotating at 2.5 times per minute clockwise 124mm Dia turning Plate with 130mm base 75mm height. Power outlet models 4A
£
125.00
[+ Add to Cart] |
|
|
Turntable TTC250 - power rings
A mains powered unit the TT250 with slip rings (4amps) to power a display above will rotate 25 kilos at 2.5 rpm. The top turn plate is 230mm with a 300mm base plate, the unit stands at 100mm high. This turntable is supplied as a bare bones system.
£
200.00
[+ Add to Cart] |
|
|
Turntable TTCSW1000
Mains powered turntable (bare bones) ready for your own deck or straight fitting to
your display item. The TTCSW1000 will carry a load of 100 kilo's at 2.5rpm.
The unit has a 400mm base with turn plate standing at 110mm in height. Built like an ox........ Should you require a unit to carry high loads call 01256 768178 we can cater for upto 300 kilos on these units. These units weigh 16 kilos.
£
390.00
[+ Add to Cart] |
|
|
Turntable TTCSW1000 - Slip rings
Mains powered turntable (bare bones) ready for your own deck or straight fitting to
your display item. The TTCSW1000 will carry a load of 100 kilo's at 2.5rpm, comes with a 4amp output for the display carried on the unit.
The unit has a 400mm base with turn plate standing at 110mm in height. Built like an ox........
£
430.00
[+ Add to Cart] |
|
|
CEU5000 turntable 500kg
A heavy duty unit with a turn plate of 400mm, carries a max centric load of 500 Kilos
Total height 125mm with a mains cable length of 2M,
Rotating speed of 1RPM, rotates clockwise, very quiet operation and fitted
with a slipping clutch. Stop time operation possible. 220-240V or 115V Possible by special request.
Supply time on these units is approx 1 week.
Any questions or advice please do call, 01256 768178
£
952.00
[+ Add to Cart] |
|
|
External CEU5000 turn table 500 kg - slip ring
A heavy duty unit with a turn plate of 400mm, carries a max centric load of 500 Kilos
Total height 125mm with a mains cable length of 2M,
Rotating speed of 1RPM, rotates clockwise, very quiet operation and fitted
with a slipping clutch. Stop time operation possible. 220-240V or 115V Possible by special request
with slip rings for illumination 4 amps or 8 amps by special request.
Supply time on these units is 1 week.
Any questions or advice please do call, 01256 768178
£
957.00
[+ Add to Cart] |
|
|
Hanging turn table CSWDHGnop
This units has bearings fitted for up side down operation, a mains powered unit without power rings. This unit will rotate 5 Kilos, rotating at 2.5 times per minute clockwise, with 130mm base 75mm height.
£
105.00
[+ Add to Cart] |
|
|
Hanging turntable CSWDHG100 with slip rings
This units has bearings fitted for up side down operation, a mains powered unit with power rings. This unit will rotate 5 Kilos, rotating at 2.5 times per minute clockwise, with 130mm base 75mm height. A 4amp power outlet is fitted to this unit.
£
125.00
[+ Add to Cart] |
|
|
Turntable TTC500 with slip rings
This unit is mains Powered, the TTC500 will rotate 50 kilos. TTC500 units have screw fixing holes to secure as required rotating at 2.5 rpm. The dimms for this unit are 230mm rotating turn plate with a 300mm base, the unit stands 100mm high, fitted with a power outlet at up to 4A. Please note that this unit can also be used up side down but the weight loading will be reduced to 25 kilos max.
Please call for more details, 01256 768178
£
310.00
[+ Add to Cart] |
|
|
Display turn table TTC250 with 400mm high graphics
Rotating display stand, 360 degrees of visual impact. A powerful turn table can give your displays a new dimension. This unit has dimensions 300mm dia foot plate with a 230mm dia display top, height is 100mm. The weight is 3.6 kilos, revolving speed of 2.5rpm. This small unit can carry a load of 25 kilos, and comes with slip rings to enable power transfer to your product if required. This unit has a graphic fitted of 400mm diameter and 400mm high, please call for further details.
£
405.00
[+ Add to Cart] |
|
|
TTCSW1000 turn table with 450mm dia beech top and black fabric skirt
Turntable display stand..... a 450 dia beech top. The skirt on this unit comes in black but other finishes are avialable, call for details. This can be custom built to your requirements just advise of your needs. This rotates at 2.5rpm and will take a load of up to 100 Kilos.
This unit can also come with slip ring power supply, add £20 call for details....
£
560.00
[+ Add to Cart] |
|
|
TTCSW 1000 with 650mm dia beech top and black fabric skirt
Turntable display stand..... a 650 dia beech top. The skirt on this unit comes in black but other finishes are avialable, call for details. This can be custom built to your requirements just advise of your needs. This rotates at 2.5rpm and will take a load of up to 100 Kilos. This unit can also come with slip ring power supply, add £20 call for details....
£
600.00
[+ Add to Cart] |
|
|
600mm dia turn table TTCSW1000 beech top - ally skirt
Turntable display stand..... a 600 dia beech top. The skirt on this unit comes in aluminium but other finishes are avialable, call for details. This can be custom built to your requirements just advise of your needs... 01256 768178. The unit rotates at 2.5rpm and will take a load of up to 100 Kilos. This unit can also come with o slip ring power supply, add £20 call for details....
£
610.00
[+ Add to Cart] |
|
|
TTCSW100 400mm dia turn table graphic lightbox RLB400
TTCSW100 display turntable, mains powered unit with power rings (power supply to display item above) this unit will rotate 10 Kilos, rotating at 2.5 times per minute clockwise 124mm Dia turning Plate with 130mm base 75mm height. Power outlet models 4 Amp. This unit has a 400mm diameter graphic with a height of 400mm. Call for info on file supply. Add a trus mounting plate for an additional £45
£
435.00
[+ Add to Cart] |
|
|
TTCSW250 turn table - 600mm dia graphic light box RLB600
Rotating display stand, 360 degrees of visual impact. A powerful turn table can give your displays a new dimension. This unit has dimensions 300mm dia foot plate with a 230mm dia display top, height is 100mm. The weight is 3.6 kilos, revolving speed of 2.5rpm. This small unit can carry a load of 25 kilos, and comes with slip rings to enable power transfer to your product if required. This unit has a graphic fitted of 600mm diameter and 600mm high, please call for further details.
£
545.00
[+ Add to Cart] |
|
|
TTCSW2000 turn table
Mains powered turntable (bare bones) ready for your own deck or straight fitting to your display item. The TTCSW2000 will carry a load of 200 kilo's at 2.5rpm. The unit has a 400mm base with turn plate standing at 110mm in height. Built like an ox........ Should you require a unit to carry high loads call 01256 768178 we can cater for upto 300 kilos on these units. These units weigh 16 kilos.
£
480.00
[+ Add to Cart] |
|
|
CSW2000 turn table with slip rings
Mains powered turntable (bare bones) ready for your own deck ot straight fitting to your display item, fitted with slip rings. The TTCSW2000 will carry a load of 200 kilo's at 2.5rpm. The unit has a 400mm base with turn plate standing at 110mm in height. Built like an ox........ Should you require a unit to carry high loads call 01256 768178 we can cater for upto 300 kilos on these units. These units weigh 16 kilos.
£
525.00
[+ Add to Cart] |
|
|
CSW3000 turn table
Mains powered turntable (bare bones) ready for your own deck or straight fitting to your display item. The TTCSW3000 will carry a load of 300 kilo's at 2.5rpm. The unit has a 400mm base with turn plate standing at 110mm in height. Built like an ox........ Should you require a unit to carry high loads call 01256 768178 we can cater for upto 300 kilos on these units. These units weigh 16 kilos.
£
525.00
[+ Add to Cart] |
|
|
CSW3000 turn table with slip rings
Mains powered turntable (bare bones) ready for your own deck or straight fitting to your display item, fitted with slip rings. The TTCSW2000 will carry a load of 300 kilo's at 2.5rpm. The unit has a 400mm base with turn plate standing at 110mm in height. Built like an ox........ Should you require a unit to carry high loads call 01256 768178 we can cater for upto 300 kilos on these units. These units weigh 16 kilos.
£
566.00
[+ Add to Cart] |
|
|
CEU 7500 turntable 700kgs
A heavy duty unit with a turn plate of 400mm, carries a max centric load of 750 Kilos
Total height 125mm with a mains cable length of 2M,
Rotating speed of 1RPM, rotates clockwise, very quiet operation and fitted
with a slipping clutch. Stop time operation possible as an option. 220-240V or 115V Possible by special request.
Supply time on these units is approx 1 week.
Any questions or advice please do call, 01256 768178
£
1485.00
[+ Add to Cart] |
|
|
CEU7500 turntable with slip rings - 750kgs
A heavy duty unit with a turn plate of 400mm, carries a max centric load of 750 Kilos
Total height 125mm with a mains cable length of 2M,
Rotating speed of 1RPM, rotates clockwise, very quiet operation and fitted
with a slipping clutch. Stop time operation possible as an optional extra. 220-240V or 115V Possible by special request.
Supply time on these units is approx 1 week.
Any questions or advice please do call, 01256 768178
£
1639.00
[+ Add to Cart] |
|
|
CS01SR turntable with sliprings - 1000kgs
A heavy duty mains powered unit with a turn plate of 760mm, carries a max centric load of 1000 Kilos, total height 190mm, fitted with a mains cable length of 2M,
Rotating speed of 0.8 RPM, rotates clockwise, very quiet operation and fitted with a slipping clutch. 220-240V - 8 amp draw. This units comes in a galvanised finish and weights 72 kilos, ships in a packing case - 92 kilo's
Supply time on these units is approx 1 week.
Any questions or advice please do call, 01256 768178
£
3745.00
[+ Add to Cart] |
|
|
Turntable Hanging Unit CSWDHG200
A hanging turntable, mains powered unit. This unit will rotate up to 20 Kilos at 2.5 times per minute anti clock wise, this unit is only available on special order, so has a supply time of approx 10 days.
£
200.00
[+ Add to Cart] |
|
|
CU030 display drive 2.5 rpm
The CU030 display drive, the load is carried by an additional thrust bearing with a flange of 65mm, this unit can carry a load up to 3 kilos at 2.5 rpm.
£
50.00
[+ Add to Cart] |
|
|
Hanging turntable CSWDHG200p
A hanging turntable, mains powered unit. This unit will rotate up to 20 Kilos at 2.5 times per minute anti clock wise and is fitted with slip rings to power a 3rd party item. This unit is only available on special order, so has a supply time of approx 10 days.
£
210.00
[+ Add to Cart] |
|
|
Mirrored battery powered turntable CM195
A battery powered unit mirror finish unit. Rotating at 2.0 times per minute clockwise or
anticlockwise direction. 125mm Dia turning reflective plate 75mm height.
Weight Loading 2 Kilos Max, also has an external power supply socket.
Operates apx 30 days on 1 x "D" Cell
£
150.00
[+ Add to Cart] |
|
|
Light activated mirrored turn table CMTT228
A very nice unit, light activated and battery powered unit with a mirror finish.
Rotating at 2.0 times per minute 2 and a 280 mm Dia turning reflective plate 75mm height. This unit has a weight Loading 2 Kilos Max and operates apx 125-200 days on 2 x "D" Cells
£
210.00
[+ Add to Cart] |
|
|
|
|
